Geotab Support Forum

I have a snow plow Co. that needs the min stop time made longer so they can see longer breadcrumb trails - in Device Pref??? -

Hello,

Logging parameters can be adjusted in the logging parameters tab of the device editor

Follow the steps below
1) Vehicles & Devices-->Devices & Vehicles
2) right click on device and select edit device
3) Click on the logging parameters tab

The default minimum log time is 200 seconds which guarantees a log every 200 seconds. Would it be possible to provide an example of how changing the value will help in your specific case?

The snow plow is entering and exiting these multiple driveways very quickly - say a driveway duratio is - - -25 seconds so - each stop makes a series of amaller trips - so the operator of the system would like to see one - much longer trip of many many stops in one longer trip detail -

Hello,

We will require a remote session to fully understand the issue. Increasing the Min Log Time may not help in this particular case since the vehicle may be exceeding the Begin of Stop/End of Stop Threshold (5 km/h).

Please visit the contacts page on www.geotab.com and submit your contact details. Please include the company which the system was purchased from so that we can include your dealer in the troubleshooting process.