Geotab Support Forum

Unanswered Active Topics

Forums Search

Forums > Hardware > Hardware Forum

Latest Firmware Releases

Last Post 15 Oct 2010 11:09 AM by Mauricio. 4 Replies.

Printer Friendly

Sort:

	Prev
Add Reply

Author

Messages

Informative

Tony

Administrator

Posts:173

10 Oct 2008 04:55 PM	Quote Reply
The following outlines latest firmware updates to the GO2/GO3/GO4 platform. GO2 RF 3.3.1: GO2 RF - Released Download Bug Fix: Set Driver id to 0 on when saving a log record if negative 5.3.3: GO2ARF - Released Download Added strict GPS criteria to reduce erroneous high speed Bug Fix: Set Driver id to 0 on when saving a log record if negative In certain cases, product ID was being reset to 1 Checks RF card to determine if unit can be upgraded to ACK mode 14.0.6: GO2BRF - Released Download Bug Fix: Possible data corruption on failed RF upload GO2 LIVE 4.3.2: GO2 Live with Sony Ericsson GM-28 Modem - Released Download Added strict GPS criteria to reduce erroneous high speed Heartbeat functionality added (unit will connect every 6 hours with ignition off) Reduced modem logging 6.5.3: GO2A Live with Sony Ericsson GM-28 Modem - Released Download Added strict GPS criteria to reduce erroneous high speed Heartbeat functionality added (unit will connect every 6 hours with ignition off) Reduced modem logging 17.1.2: GO2A Live with Sony Ericsson GT-48 Modem - Released Download Added strict GPS criteria to reduce erroneous high speed Heartbeat functionality added (unit will connect every 6 hours with ignition off) Reduced modem logging 20.3.0: GO2A Live with Multi-Tech F2 GSM Modem - Released Download Added strict GPS criteria to reduce erroneous high speed Heartbeat functionality added (unit will connect every 6 hours with ignition off) Reduced modem logging 21.3.0: GO2 J1708 Live with Multi-Tech F2 GSM Modem - Released Download Added strict GPS criteria to reduce erroneous high speed Heartbeat functionality added (unit will connect every 6 hours with ignition off) Reduced modem logging 30.2.3: GO2A Live with Multi-Tech F4 GSM Modem - Released Download Added strict GPS criteria to reduce erroneous high speed Heartbeat functionality added (unit will connect every 6 hours with ignition off) Reduced modem logging GO3 RF/Wi-Fi 35.3.0: GO3-Wi-Fi - Released Download Improved Reliability Immobilization Support Fixed Bug: Accident Data in incorrect format Heartbeat functionality added (unit will connect every hour with ignition off) Added Begin of Stop/End of Stop logging 37.3.0: GO3-J1708-Wi-Fi - Released Download Improved Reliability Immobilization Support Fixed Bug: Accident Data in incorrect format Heartbeat functionality added (unit will connect every hour with ignition off) Added Begin of Stop/End of Stop logging 39.3.3: OBD\CAN GO3 RF - Released Download Improved Reliability Immobilization Support Fixed Bug: Accident Data in incorrect format Heartbeat functionality added (unit will connect every hour with ignition off) Added Begin of Stop/End of Stop logging Added additional Engine Management functionality GO4 RF 68.2.1: GO4 J1939\CAN RF - Released Download Immobilization Support CAN Bus Error Checking Implemented Harsh Breaking support Warning Beep on Harsh Brake (requires Checkmate 5.3.1 or newer) Warning Beep on Idling (requires Checkmate 5.3.1 or newer) Microchip Bootloader update via Main Firmware + Check for invalid Device ID 69.2.1: GO4 J1708 RF - Released Download J1708 request retry algorithm improved to prevent potentially affecting the instrument cluster Intermittent ignition detect in Caterpillar engines 70.3.2: GO4 OBD\CAN RF - Released Download Immobilization Support Harsh Breaking support Warning Beep on Harsh Brake (requires Checkmate 5.3.1 or newer) Warning Beep on Idling (requires Checkmate 5.3.1 or newer) Microchip Bootloader update via Main Firmware + Check for invalid Device ID GO4 LIVE 65.5.14: GO4 J1939\CAN GSM CDMA - Released Download In certain cases, modem may not power on Warning Beep on Harsh Brake (requires Checkmate 5.3.1 or newer) Warning Beep on Idling (requires Checkmate 5.3.1 or newer) 66.4.21: GO4 J1708 GSM CDMA - Released Download J1708 request retry algorithm improved to prevent potentially affecting the instrument cluster Intermittent CDMA modem disconnect/reconnect while ignition is on (Multi-tech CDMA 2009 modem revision) Intermittent ignition detect in Caterpillar engines 67.7.15: GO4 OBD\CAN GSM CDMA - Released Download In certain cases, modem may not power on Warning Beep on Harsh Brake (requires Checkmate 5.3.1 or newer) Warning Beep on Idling (requires Checkmate 5.3.1 or newer) GO4v2 75.1.8: GO4v2 OBD\CAN J1939 RF Download J1939\CAN ignition detection algorithm improved to prevent potentially affecting the instrument cluster VIN request on Honda supported When "check engine" light is on, report both pending and confirmed engine codes Resolves issue where ignition may not be detected in J1850 vehicle types 76.2.2: GO4v2 OBD\CAN J1939 Wi-Fi Download J1939\CAN ignition detection algorithm improved to prevent potentially affecting the instrument cluster VIN request on Honda supported When "check engine" light is on, report both pending and confirmed engine codes Resolves issue where ignition may not be detected in J1850 vehicle types 80.7.33: GO4v2 OBD\CAN J1939 GSM CDMA - Released Download Resolve rare connectivity issue while attempting to auto-detect the GSM network Improved data filtering on fuel level readings (OBD\CAN) Optimized debug logging GO4v3 GO4v3 Live - 81.X.X Latest Release Firmware: 81.4.50 Latest Development Firmware: 81.5.65 GO4v3 RF - 82.X.X Latest Release Firmware: 82.1.11 Latest Development Firmware: 82.2.7

Patrick Ndalila
Posts:155

23 Sep 2010 02:03 AM	Quote Reply
How to reset product ID and load new firmware

Mauricio

Moderator

Posts:239

23 Sep 2010 01:53 PM	Quote Reply
Why do you need to reset the product ID? Is the firmware version given by the device corrupt? To update the firmware on all devices to its latest version you just need to download the specific firmware into the Geotab\Checkmate\Firmware folder on the checkmate server or you can create a key via checkmate and apply it to the devices manually. If you want to do it over the air but just to one device then you need to download the firmware file to the same folder and append 'SERIALNUMBER.' to the beginning of the filename.

houses_on_wheels
Posts:155

13 Oct 2010 12:10 PM	Quote Reply
How can I determine if my GO2 RF unit can be upgraded to ACK mode?

Mauricio

Moderator

Posts:239

15 Oct 2010 11:09 AM	Quote Reply
You must first upgrade your GO2 RF stream units to 5.3.3 Then have the units communicate with Checkmate. After that you must log into your database through SQL Management Studio and open the CustomData table and look in the binvalue column. If the vehicle has a bin value that starts with 0xCC?? where ?? is 71 or greater then it that vehicle is upgradeable. You must then go into the Vehicle table so that you can match the vehicleid with the vehicle description/serial number.

Add Reply

Forums > Hardware > Hardware Forum

Quick Reply

toggle

	Username:
	Subject:
	Body:
	Security Code:	Enter the code shown above in the box below
Submit

Active Forums 4.2