Geotab Support Forum

Talking about diagnostic codes, which codes can I get from the GO5 via GPRS? If the answer is "all" is that customizable to my particular needs?

If you refer to status codes, it depends on the type of vehicle:

J1708's: Engine Coolant Level, Engine Coolant Temperature, Engine Oil Level, Engine Total Hours of Operation, Engine Total Idle Fuel Used, Engine Total Idle Hours, Fuel level, Total Fuel Used, Total Vehicle Distance, Warning Lights

J1939's: Engine Coolant Level, Engine Coolant Temperature, Engine Oil Level, Engine Total Fuel Used, Engine Total Hours of Operation, Engine Total Idle Fuel Used, Engine Total Idle Hours, Fuel Level, Total Vehicle Distance

OBD:Coolant Temperature, Driver/Passenger Seatbelt(on specific vehicles only),Engine Faults, Fuel Level, Odometer(CAN Protocol only and on specific vehicles)

Regarding Seat Belt use, I got a GO5 installed in my Jeep Wrangler Sahara 2008, it use to report the seatbelt use, but I can not do it again, I got the options selected under vehicle set up, including the passanger seat, any clue?

Hello. Could you provide support with the serial number of the device? Post it here, email geosupport or call in and we would be able to take a look at the device.

Also, please include the database name and vehicle VIN.

Thanks I will send the info by mail...