According to the "Geotab Firmware Upgrade Documentation" PDF, it states the product ID's start with a number no lower than 3. I have quite a few vehicles listed with a GO2 Product ID of 3. However, I am showing Product ID's of "1" on the rest of our vehicles and do not show any possible firmware updates for these vehicles. Is this a glitch on the software where it should be "3," or was there a Product ID of "1" at some other time? Here is the list of those Firmware Versions being listed;
| 1.1.1 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.10 |
| 1.1.11 |
| 1.1.11 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.2 |
| 1.1.8 |