Skip to main content

Side view of white car driving on the road

5 Eco-Driving Tips to Save Fuel

Last updated on November 1, 2023 in Sustainability by Geotab Team |  2 minute read

Eco-driving is good for vehicle owners and the environment.

Did you know that your driving technique—not just driving distance and time—affects how much fuel your vehicle uses? However, Eco-driving makes it possible to save hundreds of pounds per vehicle each year on fuel and makes up an important part of a fleet sustainability programme.

What is eco-driving?

Eco-driving is a method of driving a vehicle with the goal of using less fuel and having less of an impact on the environment.


The first use of the term "eco-driving" is attributed to the Swedish National Driving School in 1998. The concept then appeared in some European driving programmes in the early 2000s and has since gone global.

What can be achieved by eco-driving?

According to the U.S. Department of Energy, aggressive driving can reduce your miles per gallon by 15–30% (at motorway speeds) or 10–40% (in stop-and-go traffic.) As fuel consumption legislation becomes tighter, it is worth adopting eco-driving techniques to improve your fleet's carbon footprint.


Benefits of eco-driving as cited by the U.S. Forest Service:

  • Lower fuel use and costs
  • Reduce exhaust emissions, including CO2
  • Reduce vehicle wear
  • Increase safety

Eco-driving techniques

1. Don't slam on the brakes

Avoid speeding up and slowing down too quickly whenever possible. Instead, traffic permitting, take your foot off the accelerator and coast to slow down.


Sudden acceleration and braking increases fuel consumption and can wear down your vehicle. Slamming on the brakes can cause the brake pads to overheat and wear down more quickly, and cause the rotors to warp.


Harsh braking can also trigger your vehicle's anti-lock braking system (ABS) when it's not needed, which could worsen brake performance. If you have an older vehicle model without ABS, harsh braking can cause a "flat-spot", an uneven patch of wear, to appear on your tyres.

2. Regulate your speed

According to Natural Resources Canada, if you change your speed back and forth from 75 km/h to 85 km/h (around 47 mph to 53 mph) every 18 seconds, you risk increasing fuel usage by a whopping 20%.


For as long as you can do it safely, in light of traffic conditions, try to maintain a steady speed and consider using cruise control. Letting your speed drop slightly as you ascend a hill can also be beneficial; you will regain some speed on the other side.

3. Reduce excess weight

The heavier your vehicle, the more fuel is needed to move it. In recent years, car manufacturers have improved materials and designs in order to reduce vehicle weight, but carrying heavy items and equipment can still have a negative effect on fuel consumption.


Check if there are pieces of equipment that can be removed from the inside or top of your vehicle that you do not need for any tasks that day. When purchasing a new vehicle, consider choosing a smaller-engined, fuel efficient model that suits your fleet needs.

4. Optimise routing

Try combining multiple trips in one and plan your route ahead of time. Stay tuned to traffic reports, note roadworks areas and avoid routes that cut through busy junctions or cities if possible.


Through route optimisation, you can minimise idling, reduce the risk of harsh braking and shorten the time spent driving. If you're dealing with a fleet of vehicles, consider using technology tools that assist with dispatch and routing to coordinate your resources.

5. Avoid idling

Did you know that letting your vehicle idle for more than 10 seconds uses up more fuel than if you had switched your vehicle off and then on again? Argonne National Laboratory has stated that each day an estimated one million long-haul heavy-duty lorries idle during mandated rest stops.


When you are not on the road, switch off your vehicle if you expect to be idling for more than 60 seconds. If one of the primary reasons for idling is temperature control, consider investing in cab or bunk heaters, coolant heaters, storage air conditioners or another piece of idle reduction equipment.

Why is eco-driving important?

Correcting inefficient driving techniques is good for vehicle owners and the environment. Get some more green fleet ideas in this blog post: Fleet sustainability best practices.

If you liked this post, let us know!


Geotab's blog posts are intended to provide information and encourage discussion on topics of interest to the telematics community at large. Geotab is not providing technical, professional or legal advice through these blog posts. While every effort has been made to ensure the information in this blog post is timely and accurate, errors and omissions may occur, and the information presented here may become out-of-date with the passage of time.

Other posts you might like

Illustration of an EV being charged

How long do electric car batteries last? What 6,300 electric vehicles tell us about EV battery life

Compare the average battery degradation for different vehicle makes and model years.

May 30, 2024

icon of a car moving as a temperature slider is adjusted

To what degree does temperature impact EV range?

Understand how temperature affects how far your EV can go on a full battery.

September 28, 2023

A sunny day in Ireland

Unlocking the power of EV data

Geotab’s Comprehensive Sustainable Fleet Solution for Operators in Ireland

July 14, 2023

Animated character dragging a scale from the side that says 'poor' to the side that says 'good'

A Fresh Take on Improving Fleet Efficiency

Is it possible to increase safety, productivity and efficiency at the same time? Read about fresh approaches to fleet efficiency.

August 3, 2018

View last rendered: 07/16/2024 09:44:28